NEED HELP SELECTING?(833) CLE-RENTRequest a Quote
HOME/EQUIPMENT/TRACKED AERIAL LIFTS
RENT + BUY · 4 MODELS · AUTHORIZED HYRAX DEALER

Tracked aerial lift
rental + sales.

Hyrax tracked boom lifts for the ground a wheeled lift can’t touch: slopes, soft ground, curbs, and tight courtyards. Non-marking tracks, self-leveling on grades, and working heights to 52.8 feet. CLE is the authorized Hyrax dealer for Eastern PA.

WORKING HEIGHT TO 52.8′OUTREACH TO 34.4′SELF-LEVELING TRACKSDIESEL 4WD
hyrax logoAUTHORIZED DEALER · EASTERN PA
The machinesEVERY PICK VERIFIED AGAINST THE LOAD CHART + SITE ACCESS
RENT OR BUY

Two ways to get the machine.

RENT · DAILY / WEEKLY / MONTHLYRent it

Seasonal exterior work, single projects, or ground a wheeled lift can’t touch. Bare rental, delivered and picked up from Pottstown, PA.

BUY · NEW + FLEET UNITSBuy it

New Hyrax units through the authorized Eastern PA dealer. Third-party financing available, and rental credit can apply toward purchase.

Need to work off rough ground?

Send the working height, ground conditions, and dates; we match the lift and quote delivery with the machine.

FAQ

Hyrax tracked lift questions

Straight answers on self-leveling, elevated travel, slopes, and ground protection.

What makes a HYRAX different from a conventional boom lift?+

A HYRAX combines a tracked undercarriage with automatic self-leveling and the ability to work without traditional stabilizer outriggers. It can move and operate on terrain where a conventional wheeled boom lift may struggle to hold a stable working position.

Can the HYRAX drive while the platform is elevated?+

Yes. The HYRAX 27.41 is designed to travel while elevated, at a controlled speed of roughly 0.25 mph at maximum working height, with about 41 ft of working height, 28 ft of outreach, and a 600 lb basket capacity.

Does the HYRAX require outriggers?+

No. Its tracked chassis and self-leveling system establish a working position without deploying four stabilizer legs, cutting setup time and eliminating the large outrigger footprint of many tracked lifts.

How much slope can the HYRAX 27.41 compensate for?+

The 27.41 self-levels automatically on slopes up to approximately 15 degrees, subject to the manufacturer's operating limits and site conditions.

What is the difference between the HYRAX 27.41 and 50.52?+

The 27.41 is the lighter, more compact option: about 41 ft of working height and 28 ft of outreach. The 50.52 provides about 52.5 ft of working height, 34.5 ft of reach, and weighs roughly 11,000 lb.

Is a HYRAX suitable for lawns or finished surfaces?+

Tracks spread the weight better than four tires, but can still mark soft ground, turf, and finished surfaces. Evaluate ground conditions first; grass mats or other ground protection may be required.

Does a HYRAX operator need training?+

Yes. Operators must be trained and authorized on the applicable mobile elevating work platform, plus jobsite familiarization, fall protection, and employer safety requirements.