HOME/CRANE FINDER

CRANE FINDER

Will it make the lift?

Enter your load, radius, and height for a rough first-pass shortlist of the CLE fleet. It runs on an estimated capacity curve, not the manufacturer's load charts, so every result must be confirmed against the machine's load chart before you rely on it.

HOW THE SCREEN WORKS

01Estimated capacity at your radiusA rough derating curve from headline capacity. Not the rated load chart.

02Reach + hook heightBoom envelope checked against your pick.

03First-pass shortlist across the fleetJekko, Maeda, and Broderson, ranked smallest first. Confirm on the load chart.

DRAW THE LIFT IN THE VISUALIZER→

YOUR LIFT

LOAD WEIGHT2,000 lbs

250 lbs18,000 lbs

LIFT RADIUS20 ft

5 ft65 ft

Horizontal distance from the crane's center pin to the load.

HOOK HEIGHT NEEDED30 ft

5 ft90 ft

SITE CONDITIONS

First-pass estimate only. This screen uses an approximate capacity curve, not the manufacturer's load charts, and it can read well above rated capacity at longer radius. Real ratings vary by boom length, boom angle, jib, and outrigger configuration. Confirm every pick against the machine's load chart. Every CLE rental includes load-chart verification against the manufacturer's duty chart before dispatch.

Lifting people, not loads?See tracked aerial lifts →

5of 15 machines clear this lift2,000 LBS @ 20′ RADIUS · 30′ HOOK

BEST MATCHSMALLEST MACHINE THAT PASSES THIS FIRST-PASS SCREEN

JEKKO · MINI CRANESPX532.2

EST. CAPACITY @ 20 ft2,601 lbs

EST. UTILIZATION77%

MARGIN+601 lbs

View this machine →Request a quote

ALSO PASS THIS FIRST-PASS SCREEN

MAEDAPASSES SCREEN

MC405

EST. @ 20′4,001 lbs

50% of estimate+2,001 lbs

JEKKOPASSES SCREEN

SPX650

EST. @ 20′6,504 lbs

31% of estimate+4,504 lbs

JEKKOPASSES SCREEN

SPX1280

EST. @ 20′10,397 lbs

19% of estimate+8,397 lbs

BRODERSONPASSES SCREEN

IC-80-3G

EST. @ 20′6,480 lbs

31% of estimate+4,480 lbs

OUT OF RANGE FOR THIS LIFT

JEKKOSPX328 EVOOVER ESTIMATED CAPACITY AT THIS RADIUS

JEKKOSPX527OVER ESTIMATED CAPACITY AT THIS RADIUS

MAEDAMC285C-2NOT ENOUGH HOOK HEIGHT · OVER ESTIMATED CAPACITY AT THIS RADIUS

MAEDAMC305OVER ESTIMATED CAPACITY AT THIS RADIUS

HYRAX27.41OVER ESTIMATED CAPACITY AT THIS RADIUS

HYRAX50.43OVER ESTIMATED CAPACITY AT THIS RADIUS

HYRAX50.45OVER ESTIMATED CAPACITY AT THIS RADIUS

HYRAX50.52OVER ESTIMATED CAPACITY AT THIS RADIUS

BRODERSONIC-35-2AOVER ESTIMATED CAPACITY AT THIS RADIUS

BRODERSONIC-40-2COVER ESTIMATED CAPACITY AT THIS RADIUS

Want the full spec-by-spec picture? Open the comparison tool →

(833) CLE-RENT · [email protected]

401 W. High Street, Pottstown, PA 19464

Lift Plan Screening Report

Mini crane finder · weight, radius, and height vs the CLE fleet

Pick Parameters

Load weight2,000 lbs

Lift radius20 ft

Hook height needed30 ft

Best Match · JEKKO SPX532.2

Smallest machine that passes the first-pass screen · Est. capacity @ 20 ft: 2,601 lbs · Est. utilization 77% · Margin +601 lbs

First-pass estimate only, generated with the CLE Crane Finder on an approximate capacity curve, not the manufacturer's load charts. It can read above rated capacity at longer radius. Real ratings vary by boom length, boom angle, jib, and outrigger configuration. This document is not a lift plan and does not replace verification against the manufacturer's duty chart. CLE runs load-chart verification on every rental before dispatch.

GENERATED BY THE CLE PLANNING TOOLS · CLEAMERICA.COM · PRELIMINARY PLANNING DOCUMENT - NOT A CERTIFIED LIFT PLAN · VERIFY WITH CLE BEFORE MOBILIZATION