AUTHORIZED JEKKO DEALER
AUTHORIZED HYRAX DEALER
Outrigger Spatial Planner
GEOMETRY: VERIFIEDCRANE MODEL
OUTRIGGER SETUP9 POS/LEG
EDITING: ALL LEGS
MATERIAL FIT
SITE OBSTACLES
0 obstacles on site · drag to repositionJEKKO SPX532.2TOP VIEW · PLAN
SETUP FOOTPRINT
15'0" × 17'2"
PAD SPREAD (C-C)
15'0"
MATERIAL RADIUS
9'5"
MATERIAL FIT
INTERFERENCE
SHORTCUTSClickSelect padShift+ClickAdd / remove padDrag padMove outriggerDragMaterial / structureScrollPan canvas+ / −Zoom
This tool evaluates physical footprint, clearance, and horizontal radius from the crane slew center. It does not replace the Jekko operator manual, load chart, ground-bearing evaluation, or outrigger-reaction analysis. Rated capacity must be confirmed against the applicable load chart. Drag the crane pad or pick point on the plan to reposition.
SETUP INSPECTOR
SelectedAll legs
Config modeDiscrete
Stability zoneJ7 · 7.5 ft
Setup footprint15'0" × 17'2"
Material radius9'5"
Min clearanceCONTACT
Data statusVerified
PAD-CENTER COORDS
LEG 3-7.5, 8.6 ft
LEG 47.5, 8.6 ft
LEG 1-7.5, -8.6 ft
LEG 27.5, -8.6 ft
Need this lift planned?
Send the load, radius, and access dimensions and CLE will confirm the machine and setup.
Request a Quote
(833) CLE-RENT · [email protected]
401 W. High Street, Pottstown, PA 19464
Outrigger Setup Report
JEKKO SPX532.2 · geometry VERIFIED
NO PLAN VIEW WAS CAPTURED FOR THIS REPORT. GENERATE IT WITH THE TOOL'S EXPORT PDF BUTTON SO THE DRAWING IS INCLUDED.
Setup Summary
MachineJEKKO SPX532.2
Data statusVERIFIED
Setup footprint15'0" × 17'2"
Governing zoneJ7 · 7.5 ft
Material96 × 48"
Radius from crane9'5"
Fit statusINTERFERENCE
Clearance margin12"
Per-Leg Configuration
| Leg | Outrigger angle | Extension | Pad center (X, Y) |
|---|---|---|---|
| 3 | 47° | 100% | -7.5, 8.6 ft |
| 4 | 47° | 100% | 7.5, 8.6 ft |
| 1 | 47° | 100% | -7.5, -8.6 ft |
| 2 | 47° | 100% | 7.5, -8.6 ft |
Stability by Side
| Side | Tipping-line distance | Stability level |
|---|---|---|
| Front | 8.6 ft | J7 |
| Right | 7.5 ft | J7 |
| Rear | 8.6 ft | J7 |
| Left | 7.5 ft | J7 |
Preliminary geometric planning report. Footprint, clearance, and radius only. Not a certified lift plan. Confirm rated capacity against the applicable Jekko load chart and verify all dimensions at the jobsite before delivery.
GENERATED BY THE CLE PLANNING TOOLS · CLEAMERICA.COM · PRELIMINARY PLANNING DOCUMENT - NOT A CERTIFIED LIFT PLAN · VERIFY WITH CLE BEFORE MOBILIZATION